Sales, Supply welding rod Manufacturers, Wholesalers China
  • Stainless Steel Welding Wire

    Stainless Steel Welding Wire

    Stainless Steel Welding Wire Wire is usually used to weld carbon steel and stainless dissimilar materials, sometimes to weld martensite and pearlite steel with poor toughness, such as petrochemical industry, fire power station and other industries. Description (MIG Stainless Steel Welding Wire): 1) Grade: SS201, 202, 304(L), 308(L), 309(L), 310(S), 316(L), 347 etc. 2) Standard: AISI, ASTM, DIN, GB, JIS, SUS 3) Diameter: 0.8mm-4.0mm 4) Certification: ISO9001: 2008 5) Coil weight: 5KG, 15KG, and 25KG 6) Application: Mesh weaving, Soft pipe, Isolation, Shipbuilding, Automobile, Chemical industry

  • Carbon Steel And Mild Steel Welding Electrode

    Carbon Steel And Mild Steel Welding Electrode

    Features: Carbon steel welding electrode is suitable to work in all position with excellent welding technological properties, stable arc less splash, shaped good appearance, easy for removal of slag layer, easy for striking and restriking arc. Applications: It is used for welding common carbon steel structure, suitable for small thin plates and low-alloy steel, such as 09Mn2. Model: AWS E6010/E6011/E6013/E6018/E7014/E7024 Note: No need to bake before using, but please bake 30-60 minutes in 150℃ if the electrode is humid.

  • Tin Solder Wire/bar/paste/flux

    Tin Solder Wire/bar/paste/flux

    Detailed Product Description Our tin solder products are made from Grade-A pure virgin metals. Quality standards for all bar solder exceed ASTM B32, QQS-571 and J-STD-006. Product Name Tin solder/wire/Lead-Free solder bar and wire Features Tin solder include Tin-Lead solder bar and Lead-free solder bar. 1) It can applied in radio, communication, meters, instruments and copper, tin and irons and etc. 2) Residue is easy to remove by hot air after soldering work if necessary 3) Available in many alloy composition, other alloy compositions are also available 4) Smooth surface, good fluidness melt 5) Good mechanical performance 6) Good moisture, bright weld spot 7) Very few scraps 8) Forms: Bar, wire

  • Zirconium Wire

    Zirconium Wire

    Type : Zirconium wire Standard : ASTM B550 Grade : Zr1, R60702 ,R60705 Surface : Polished Density : 6.51g/cm3 Melting point : 1852℃ Boiling point : 4377℃ Application : Chemical processing etc. Aerospace, Industry, Navigation, Smelting, Chemical plants, and so on. Plate heat exchanger, and condensers. Chemical and medical equipment. Zirconium is a grayish silver, dense, ductile, very hard, easily fabricated, and highly corrosion resistant metal.

  • Silver Wire/rod

    Silver Wire/rod

    Silver Wire/rod Application: Welding segment of saw blade, gang saw, band saw. 1. Clear joint through dispersion. 2. Applicable to precision electronics components of thin film and fine wire. 3. Applicable to electric connection and heat exchanger due to its complete heat and electric conductivity. 4. It is possible to seal to make pressure vessel or vacuum sealing. 5. It makes convenient one-throughput processing for multi-joints. 6. Step brazing for complex casting. 7. Very little change of dimension or transformation compared to welding. 8. Very clear finishing to give second treatments. 9. Possible to joint different materials, as well as non-metallic component of Ceramic. 10.It can be melted dependent on the reheating of Brazing part.

  • Low-Alloy Steel Welding Electrode

    Low-Alloy Steel Welding Electrode

    Features: Low-alloy steel welding electrode is suitable to work in all position. It provides excellent usability and beautiful weld appearance, with good slag detachability, suitable for short arc welding. Applications: It is used for welding the Marine steels and other same grade strength structure, like vehicles, bridges and constructions, ect. Model: AWS E7015/E7016/E7018/E8015/E8016/E8018/E9018 Note: 1. The electrode must be baked 1-2 hours in 350℃-450℃ before using. 2. Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.

  • Hardfacing Steel Welding Electrode

    Hardfacing Steel Welding Electrode

    Hardfacing Steel Welding Electrode Features: D147 Normal low-mild allooy surfacing welding electrode. It can be used to repair various carbon steels surface and carbon steel track swich. D507 Applicable in value sealing face, axle, mixer paddle and valve of carbon steel or alloy steel, the operating temperature is below 450℃. D517 High Cr steel surfacing welding electrode. It can be used for surfacing welding value sealing surface, axle, mixer, blades of the screw conveyer. D217 Good abrasion resistance accompanied with medium impact, applicable in remedying shovel tooth, bulldozer blade, bucket, crane wheel,cutter blade and etc. D707 The weld metal contains tungsten carbide, applied in the welding of overlay of rock strong wear resistant, such as earth mover, concrete agitator, etc. D802 Co-Cr-W alloy, flux-cored Co based surfacing with electrode, surfacing metal can be kept good property of wear resistance and corrosion resistance when operated at 650℃.

  • High Strength Steel Welding Electrode

    High Strength Steel Welding Electrode

    High Strength Steel Welding Electrode Features: High strength steel welding electrode is suitable to work in all position with excellent welding technological properties, stable arc less splash, shaped good appearance, easy for removal of slag layer, easy for striking and restriking arc. Applications: It is used for welding low-alloy steel with corresponding grade of strength. Model: AWS E7015/E7016/E7018 Note: 1. The electrode must be baked 1-2 hours in 350℃-450℃ before using. 2. Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.

  • Stainless Steel Welding Electrode

    Stainless Steel Welding Electrode

    Features: Stainless steel welding electrode has good machanical property, intervryctaline corrosion-resistance, excellent operating properties, suitable for all positions. Applications: Stainless steel welding is used for welding 0Cr19Ni9, 0Cr19Ni11Ti corrosion-resistant stainless steel structures whose working temperature is lower than 300℃, surfacing stainless steel welding electrode. Model: AWS E308-16/E308L-16/E309-16/E309L-16/E309MoL-16/E310-16/E312-16/E316-16/E316L-16/E318-16/E347-16/E410-16 Note: 1. The electrode should be baked 1 hour in 300℃-350℃ before using. 2. Welding in short arc, and swing scope should not excess2.5 times of the electrode diameter.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

Message :